CO₂ emissions in road freight transport: What occurs per tonne-kilometer and how you can reduce them
Depending on the vehicle and the load, a truck in road freight transport generates roughly 60 to 110 grams of CO₂ equivalents per tonne-kilometer. This is calculated as weight in tons times distance in kilometers times emission factor. The values can be reduced through better utilization, fewer empty trips, route optimization, economical driving, modern vehicles and alternative fuels.
What is a ton-kilometer?
The ton-kilometer, abbreviated tkm, is the unit of measurement of transport performance. It occurs when a ton of goods is transported one kilometer. A truck that drives 10 tons over 300 kilometers produces 3,000 ton-kilometers. The unit is suitable for making emissions from different transports comparable because it links weight and distance.
On this basis, emissions per shipment can be calculated and shown in sustainability reports, which customers and authorities are increasingly demanding.
How high are the emissions?
The emissions depend heavily on the vehicle, load, route, traffic and fuel. As a rough guide, values of around 60 to 110 grams of CO₂ equivalents per tonne-kilometer are often given for road freight transport. A fully loaded 40-ton truck is at the lower end, a small transporter with low utilization is significantly higher. For binding calculations, you should use recognized factors and methods, such as standard factors from databases or vehicle data.
How to calculate emissions
The simple formula is: weight of the goods in tons times distance in kilometers times emission factor. Example: 10 tons are transported 300 kilometers, the emission factor is 80 grams per tkm. That equals 10 times 300 times 80 equals 240,000 grams, i.e. 240 kilograms of CO₂e. More precise procedures take actual fuel consumption, utilization and the upstream chain of energy provision into account. Recognized methods are described in standards and frameworks, for example in the standard for calculating greenhouse gas emissions in transport chains.
What the emissions depend on
The following factors determine the value the most:
• Utilization: the fuller the truck, the lower the emissions per tonne
• Empty journeys: return journeys without a load worsen the balance
• Vehicle type and technology: size, engine, Aerodynamics and emissions standards
• Driving style: speed, acceleration and predictive driving
• Route and traffic: detours, traffic jams, gradients
• Fuel and drive: diesel, HVO, biofuels, electric
Many of these factors can be influenced with organizational measures.
Measure 1: Increase utilization
The most effective adjustment screw is often capacity utilization. By bundling shipments, partial and full loads, and optimized loading, emissions per ton are reduced. Check whether pallets are stackable and whether you can combine shipments. A forwarding company for partial and full loads helps to plan loads so that vehicles are better filled.
Measure 2: Avoid empty trips and detours
Return loads and Follow-up orders nearby avoid empty kilometers. Good route planning shortens routes and saves fuel. Recurring routes can be planned with Fixed tours so that outward and return journeys are full and vehicles are used efficiently.
Measure 3: Vehicles and fuels
Modern vehicles with current emissions standards, Aerodynamic attachments and low-friction tires consume less. Alternative fuels such as HVO, a hydrogenated vegetable oil, can reduce emissions as long as they are proven to be produced sustainably. Electric trucks are suitable for shorter distances in distribution transport. Driver training on economical driving often saves several percent of fuel. For small express journeys, you should choose vehicles that match the load so that vehicles that are not too large are used, for example with a Kurier-Express.
Costs, tolls and reporting obligations
Emissions also have financial consequences. In GermanFor several years now, the truck toll in Germany has also been based on the CO₂ emissions of the vehicle class, so that low-emission vehicles save costs. Clients are also increasingly demanding information on emissions for their reports. Anyone who can provide data gains advantages in tenders. Speak to your transport partner about emissions data.
Role of the transport partner
As a client, you have influence by querying emissions data, taking sustainability into account when making your selection and planning orders so that vehicles are better utilized. Partners with modern fleets, driver training and transparent data support your goals. Agree on common metrics and regularly check whether they are improving. Progress can be easily tracked, especially with regular routes.
Example calculation for a pallet shipment
A pallet weighing 500 kilograms is transported 200 kilometers. That's 0.5 tons times 200 kilometers equals 100 ton-kilometers. With an emission factor of 90 grams per tkm, 9,000 grams, i.e. 9 kilograms of CO₂e, are produced. If the same pallet travels in a group transport that achieves better utilization through bundling, the value may be lower. Such calculations help to compare transport options and justify decisions.
Measuring, reporting, improving
If you want to reduce emissions, you should first measure them. Collect data on distances, weights and vehicles and convert them using a consistent method. Report results internally and to customers and set goals. Regular evaluation shows which routes and vehicles offer the greatest leverage. Small steps that are implemented permanently often have a greater impact than individual large projects.
Look at transport and storage together
Warehouse location and inventory planning also influence transport emissions. A warehouse close to the customer shortens distances, and bundled deliveries reduce journeys. With storage space in Cologne, inventory can be stored regionally and deliveries in the area can be processed quickly and efficiently. Looking at the entire chain brings more than measures at individual points.
Checklist: Reduce emissions in transport
The following measures have proven to be effective:
• Bundling shipments and increasing utilization
• Avoiding empty trips due to return loads and follow-up orders
• Optimize routes and travel times
• Select vehicles that match the load
• Query emissions data from service providers and compare
Start with the points that can be implemented most quickly and evaluate the effect.
Frequently asked questions
How much CO₂ does a truck produce per tonne-kilometer?
Depending on the vehicle and load, roughly 60 to 110 grams of CO₂ equivalents. Exact values depend on the individual case.
Which is more beneficial: a new truck or better utilization?
Both help. Better utilization often brings major effects quickly.
Are biofuels climate-neutral?
Not automatically. The balance depends on the raw material and production.
Conclusion
CO₂ emissions in road freight transport can be measured and reduced. With good utilization, fewer empty trips, modern technology and data, you create transparency and often save costs. For your sustainable transport planning, you will receive an offer via our Offer calculator.
Share URL
https://www.tz-transport.de/en/blogs/co-emissions-in-road-freight-transport-what-occurs-per-tonne-kilometer-and-how-you-can-reduce-them